Files Download

Tuesday, December 27, 2016

Error 6000 or P03 on Canon printers

That is a line feed error. It also should be flashing 3 times for this error on the on/off button.
Solution 1:

Verify that the paper tray is correctly set.
If any object is placed in front of the machine, remove it.

Solution 2:

Search for any small pieces of paper in the printer, or a tiny object.

Solution 3:

Power off the printer
Wait 30 seconds
Power on.

Solution 4: one of these parts could be faulty:

Timing sensor unit QM2-2683
Timing slit disk film QC1-6229
Feed roller assy QL2-0925
Platten unit QM2-2923
Logic board assy QM2-3078
Paper feed motor QK1-1502

Post a Question....

Available link for download

Free Download Supercopier 1 2 1 0 Final 2015

Image result for Supercopier 1.2.1.0 Free Download Supercopier 1.2.1.0 Final 2015

Supercopier 1.2.1.0 Final 2015 adalah sebuah aplikasi yang berfungsi untuk mempercepat proses menyalin atau mengcopy baik dari komputer ke komputer atau dari flasdisk kee komputer maupun sebaliknya. Dengan menggunakan software ini kecepatan copying dapat meningkat lebih dari 50% dari pada menggunakan copy bawaan windows. Sehingga ketika kita mengcopy file yang besar tidak memakan waktu yang lama.

Features Of Supercopier

Transfer resuming
Copy speed control
No bugs if you copy more than 2GB at once
Copy speed computation
Better copy progress display
Copy list editable while copying
Error log
Copy list saving/loading

Free Download Supercopier 1.2.1.0 Final 2015

From SolidFiles

Supercopier 1.2.1.0 Final (13 Mb)

From MirrorCreator

Supercopier 1.2.1.0 Final (13 Mb)

Available link for download

How to solve Toner Sensor Error on Oki printers

Masih berlanjut trusss ,cuma ini edit pakai software berbasis Chipset Sunplus

gmbr di atas adalah VFD key code ,yg terdiri dari 40 code

dan ini adalah IR code 108 code ,banyak juga ya .......

CARA MENGEDITNYA

rubahlah alamat key code mulai dari key code 00 dan seterusnya dengan angka 0-10 dan trus demikian ,maksudnya bila sudah sampai angka 10 ulang lagi mulai dari 0 sampai habis ,

kemudian save firmware tersebut dan isikan ke DVD player ,tekanlah tombol key yg ada di player dan perhatikan angka berapa yg keluar ,contoh : seandainya anda tekan tombol OPEN CLOSE dan tampilan di TV adalah angka 1 ,nah rubahlah angka 1 tersebut dengan OPEN CLOSE di software, he...he.. pusing juga ya.... (hal ini sebenarnya sangat mudah bila di praktekan bukan hanya membaca teori ini saja ) karena hal ini adalah cara termudah mengedit tombol VFD dan Remote control dengan berbasiskan chipset Sunplus .

Available link for download

How to fix a Canon MP237 Printer

For a time we will share tips for printer Canon MP237 who experienced a problem that must be reset. Canon MP237 multifunction printer is a type that can be used to scan, copy, and print. Many people prefer to use a Canon MP237 as it has some functionality and price is quite affordable. However, users need to know if this type of printer may experience an error at any time. Preview: List Printer Problems and How to Overcome It

To resolve the error with the printer Canon Mp237 need to be reset. So this printer requires resetter, please note this resetter has a function to reset the chip embedded in the printer, where the chip will record every printer printing process. By the time the chip is detected within the maximum number of printing, the printer and Canon MP237 Bliking immediately stopped. This is what often makes users feel panic especially important when printing text in the form of reports or other files.

Error Cause Ink Absorber

Printer Canon wearing small pads that form a sponge to absorb the ink discharge accumulated during printing and cleaning the head cartridge. When the sponge pads full, the printer will notify you with an error message such as P07 or E08 "A printer error has occurred" or "Ink absorber full". See 10 Ways to Take Care of printers that use of Fixed Durability

Error Ink Absorber Full printer Canon MP237 Printer How to Reset Canon

Cessation of the operating system that is making users need resetter to troubleshoot problems that occur on the Canon MP237. The lack of experience usually make the owners are confused how to solve this problem. Especially for beginners who still do not understand the many ways in troubleshooting an error on the Canon MP237. For that as voters Canon MP237 printer you need to know the ways to reset so that no mistake. This method is also suitable for the Canon MP287 printer reset.

Steps How to Reset Printer Canon MP237

Phase 1: Making the printer to service mode

Before performing the reset first step that must be done is to make canon printers into service mode. With the service mode condition then the process will run smoothly. Here are the easy steps into the service mode:

Turn off the printer by pressing the power button, if the condition of your printer is still alive.

Press the STOP / RESET when the condition of the printer is already dead. Then press the power button along with the STOP / RESET.

Remove the pressure of the STOP / RESET and hold pressure on the power button.

At the position of the power button is still depressed, you also have to compensate by pressing the STOP / RESET up to six times and then release simultaneously with the power button.

If you are correct in doing the above step to reset the MP237, the computer will detect a new device if the service mode successfully. otherwise if the process fails then the detection will not appear.

Phase 2: Reset Printer Canon MP237

Get Tools resetter Canon MP237 here, first.

Start doing the ordered software resetter MP237

Extract and run resetter MP237 by clicking 2 times flie Service tool v3400.exe

1. Sub Tab Clear Ink Counter click Play

2. Sub Tab Ink Absorber Counter click play

3. Click the EPROM then the printer will begin printing a sheet of paper.

Note the picture below:

Image Canon resetter service tool How to Reset Printer Canon

Turn the printer off and on again, if the process is successful then the printer resetter will return as its function.

Available link for download

How to fix Invalid BOOT INI

If you encounter this Problem "Invalid Boot.ini" error message when you start your computer. Try this steps to fix it!!

1. Configure the computer to boot from the CD-ROM or DVD-ROM drive.
2. Insert the original or untouched windows XP CD into your CD-ROM or DVD-ROM drive.
3. When prompted to press any key to boot from the CD, press any key.

4. Once in the Windows XP setup menu press the "R" key to repair Windows.

5. Log into your Windows installation by pressing the "1" key and pressing enter.
6. You will then be prompted for your administrator password, enter your password is you have any, otherwise just press Enter.
7. At the command prompt type,

bootcfg /rebuild and then press ENTER.

Follow the instructions that appear on the screen to add the Windows installations to the Boot.ini file.

Add installation to boot list? (Yes/No/All): type Y
Enter Load Identifier: Type the name of your operating system, This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition.
Enter OS Load options: type /fastdetect /noexecute=optin and then press ENTER.

9. To quit Recovery Console type EXIT, and then press ENTER. Your computer restarts.

Available link for download

Epson new cartridges T073 73N

Berikut ini langkah-langkahnya :

Klik kanan pada desktop, kemudian pilih new shortcut, kemudian akan muncul window kecil, kemudian masukan ke teks box = shutdown -s -t 800 -c “Pesan anda”

Kemudian klik next, maka anda akan diminta membuat untuk icon anda, anda bebas memberi nama apapun, kali ini saya dengan contoh “Internet Explorer”, kemudian klik finish.

Jadi dech, tapi kok icon nya jelek ya?, untuk itu klik kanan pada icon tersebut, kemudian klik property, klik change icon, klik OK aja kalau ada konfirmasi, kemudian pilih icon sesuai selera (disini saya dengan contoh icon Internet Explorer).OK, apply, OK.

Kemudian mari kita coba double klik icon tersebut, maka kalau benar maka akan keluar sebuah konfirmasi bahwa windows akan shutdown dalam waktu beberapa menit. nah kalau dibiarkan terus maka akan benar-benar shutdown.

nah untuk menanggulanginya, cukup klik start, pilih RUN, lalu ketikan shutdown -a

Available link for download

How to Reset Canon Pixma iP90

Canon pixma iP90 released almost at the same time with canon Pixma iP 1880. Canon iP90 is printer with single function. Cartidges which used in canon Pixma iP90 is BCI-15BK, BCI-115C dan BCI-16C. Resetting procedure canon iP90 almost the same as manual reset canon iP1880. You can use combination of button in the printer to reset the printer.

Follow the step to resetting canon Pixma iP90 :

Before resetting printer canon iP90, start with printer power off .
Press resume button coincide with power button.
While pressing power button, release resume button.
Press resume button 2 times and then release both button
Green LED indocator will blinking and then stopped blinking.
When the Power LED lights in green, press resume button 4 times.
Press power button and the printer power will off. otherwise off, depress again power button.
And the turn on the printer again, your printer canon iP90 should be response as normal.

Available link for download

Tuesday, December 27, 2016

Error 6000 or P03 on Canon printers

Free Download Supercopier 1 2 1 0 Final 2015

How to solve Toner Sensor Error on Oki printers

How to fix a Canon MP237 Printer

How to fix a Canon MP237 Printer

Error Cause Ink Absorber

Phase 1: Making the printer to service mode

Phase 2: Reset Printer Canon MP237

Monday, December 26, 2016

How to fix Invalid BOOT INI

Epson new cartridges T073 73N

How to Reset Canon Pixma iP90