Showing posts with label setup. Show all posts
Showing posts with label setup. Show all posts

Thursday, February 9, 2017

How to perform the wireless LAN setup using WPS connection Windows

How to perform the wireless LAN setup using WPS connection Windows


Make sure that the computer and access point or router are connected.


After confirming the connection, perform the following instructions to add (connect) the machine to the network.

A: Internet
B: Access point or wireless router, etc.
- Notes on Wireless Connection
  • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device?s instruction manual or contact its manufacturer.
  • Check if your device supports IEEE802.11n/g/b.
  • In an office setup, consult your network administrator.
  • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
  • If an error message appears or if you have trouble with the network connection, refer to the printed manual: Network Setup Troubleshooting.
When using a router, connect the machine and computer to the LAN side (same network segment).
Wireless Setup Using WPS (Wi-Fi Protected Setup)
REFERENCE
For details on WPS, refer to the manual of your access point.



Use the Menu button (A) to select Device settings.




Select WLAN active/inactive, then press the OK button.


Select Wireless LAN active, then press the OK button.



When wireless connection is enabled, the Wi-Fi lamp (C) lights blue.



Select Wireless LAN setup, then press the OK button.



Select WPS, then press the OK button.


Select Push button method, then press the OK button.
- To use the PIN code method for setup
Select PIN code method in 7, then press the OK button. Follow the on-screen instructions to operate the machine and access point. When the screen in 9 appears, press the OK button.


Press and hold the WPS button on the access point (for about 5 seconds), then press the OK button on the machine within 2 minutes.

For details on the WPS button pressing, refer to the manual of your access point.



The Wi-Fi lamp (blue) on the machine flashes while searching for or connecting toan access point.



When the above screen appears, press the OK button.
IMPORTANT
  • If the timeout error screen appears, press the OK button, then start over from 8.
If another error appears, refer to the printed manual: Network Setup Troubleshooting.

Software Installation
The procedure is not necessary if the software was installed using the network setup cable.
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computers hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)
IMPORTANT
  • Quit all running applications before installation.
  • Log on as the administrator (or a member of the Administrators group).
  • Do not switch users during the installation process.
  • Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
  • It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the Setup CD-ROM during restart. The installation resumes once your computer has restarted.
If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.

REFERENCE
It is not necessary to connect the machine to the computer with the network setup cable.

Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
The setup program starts automatically.
REFERENCE
If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. When the CD-ROM contents appear, double-click MSETUP4.EXE.

(Windows 7/Windows Vista)
Windows XP



Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.

If the User Account Control dialog box reappears in following steps, click Yes or Continue.


Select your place of residence, then click Next.
REFERENCE
If the Select Language screen appears, select a language, then click Next.



Select a country or region, then click Next.



Click Easy Install.

The drivers, application software, and on-screen manuals are installed.
REFERENCE
If you want to select particular items to install, click Custom Install.



Click Install.



Select Use the printer with wireless LAN connection, then click Next.

Follow any on-screen instructions to proceed with the software installation.



When the Printer Detection screen appears, click Next.
REFERENCE
If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in 8.

Click Cancel and start again from 6, then be sure to select Use the printer with wireless LAN connection in 8.



Make sure that any of the lamps on the mode buttons (A) lights, then click OK.



When the Detected Printers List dialog box appears, select Canon MX410 series, then click Next.
REFERENCE
If the machine is not detected, Set Up New Printer dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Redetect.



When the Setup Completion screen appears, click Complete or OK.

Click Next.
Follow any on-screen instructions to proceed with the software installation.
- Important Information for the Installation
If the serial number is not displayed on the registration screen, input the number found inside the machine.

IMPORTANT
If the power is on, the FINE Cartridge Holder will move when the Scanning Unit (Cover) (A) is opened.
REFERENCE

The User Registration screen will only be displayed when Europe, Middle East, Africa is selected on the Select Your Place of Residence screen.
If the Extended Survey Program screen appears.

If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machines functionality.)

Click Exit to complete the installation.
Solution Menu EX starts.
Remove the Setup CD-ROM and keep it in a safe place.
REFERENCE
The buttons displayed on Solution Menu EX may vary depending on the country or region of purchase.
REFERENCE
  • Installing the XPS Printer Driver
In Windows 7 and Windows Vista SP1 or later, the XPS Printer Driver can be installed additionally. To install, perform from 1 in [ Software Installation ]. Click Custom Install in 6, then select XPS Printer Driver in the Custom Install screen.
Available link for download

Read more »
Posted by at No comments:
Labels: , , , , , , , , , ,

Wednesday, February 8, 2017

How to setup canon Cloud Ready Printers

How to setup canon Cloud Ready Printers


For the best Google Cloud Print experience, we recommend that you use a Cloud Ready printer. Cloud Ready printers connect directly to the web and don’t require a PC to setup: you can connect one to your Google Cloud Print account in seconds, and immediately start printing to it.
Use the setup tab for information on how to setup any of the printers below. For printers not listed here, see the section on ‘Setting up other printers’.

Setting up other printers

Cloud Print Ready printers

For Cloud Print Ready printers not listed here, please follow the instructions included with your printer. This can typically be found in the owner’s manual.

Classic printers

Classic Printers connect to the Internet through a laptop or PC, and register with Google Cloud Print using a feature of Google Chrome.
Once Google Chrome is installed, follow the steps below to enable the Google Cloud Print connector in Google Chrome.
  1. Log in to your user account on the Windows, Mac, or Linux computer.
  2. Open Google Chrome.
  3. Click the Chrome menu on the browser toolbar.
  4. Select Settings.
  5. Click the Show advanced settings link.
  6. Scroll down to the “Google Cloud Print” section. Click Sign in to Google Cloud Print.
  7. In the window that appears, sign in with your Google Account to enable the Google Cloud Print connector.
  8. Select the printers you want to connect, and then click Add printer(s).
  9. Youll see a confirmation that Google Cloud Print has been enabled. Click Manage your printers to learn more.
The printer is now associated with your Google Account and connected to Google Cloud Print. You can print to this printer using Google Cloud Print whenever you’re signed in with the same Google Account.

Supported printer models

Office All-In-One Printers

  • PIXMA MX922
  • PIXMA MX892
  • PIXMA MX722
  • PIXMA MX522

Photo All-In-One Printers

  • PIXMA MG8220
  • PIXMA MG6320
  • PIXMA MG6220
  • PIXMA MG5420
  • PIXMA MG4220
  • PIXMA MG7120
  • PIXMA MG6420
  • PIXMA MG5520
  • PIXMA MG5522
  • PIXMA MG3520

Laser Multifunction Printers

  • Color imageCLASS MF8580Cdw
  • Color imageCLASS MF8280Cw



Available link for download

Read more »
Posted by at No comments:
Labels: , , , , , ,

Monday, January 30, 2017

How to Setup and Install Windows XP

How to Setup and Install Windows XP



Step by Step Video Tutorial.
How to Setup and Install Windows XP.

Things you will need are...

Windows XP CD-ROM
Drivers and Utilities CD *If Needed.
*Some computers dont need a Drivers and Utility CD ROM, for Sound and Network Drivers, because you might have a separate for backup or driver support.

Put the Windows XP CD-ROM into your "default CD-ROM Drive".

Restart Windows. When prompted, there will be a choice on the Top Right hand corner of the screen. Press Any Key to boot from CD-ROM...

You Might need to change the drive configuration - SATA to IDE.

If you have a laptop, The Windows XP Disk will not work in most cases, because you have a SATA drive.

How to get arround the SATA Hard Drive Configuration.

1. When the computer loads up, hit F2 to access the setup menu for the computer.

2. Find where it says Hard Drive Configuration, Change it from SATA to IDE.

3. Save Settings and Exit.

4. Restart...
5. "Boot From CD-ROM Windows XP" and Boot From CD/DVD ROM Vista...

6. "PRESS ANY KEY"


Available link for download

Read more »
Posted by at No comments:
Labels: , , , , , ,

Tuesday, January 17, 2017

How to setup OpenDNS

How to setup OpenDNS


 The job of a DNS server is to translate web address (like www.yahoo.com) into a computer-readable number also known as an IP address (209.131.36.158). Once your computer knows the IP location of a web domain name, it opens the website in your browser.

DNS servers are provided by ISP (like PLDT DSL, GLOBE DSL, and alike) but if the DNS server of our ISP is slow it would take time for the server to translate the web address that adds up to the overall loading time of the website. And this is the time you will experience slow browsing.

To solve this problem, i will teach you on how to setup OpenDNS, a simple and reliable service that speeds up your Internet connection and also handles some other very important issues. There are no software to install, it’s very easy to set up at no cost.

Follow this steps on how to setup OpenDNS and make your web browsing safer, faster,and more reliable

For Microsoft Windows XP, 2000

   1. Open control Panel
   2. click Network Connection
   3. Right click on Local Connection Properties then select Properties
   4. on “General Tab” select Internet Protocol (TCP/IP) then click Properties


   5. Click "Use the Following DNS server addresses"
   6. Change your DNS Server addresses to 208.67.222.222 and 208.67.220.220 and click OK.

For Microsoft Windows Vista and Windows 7
   1. Open Control Panel
   2. Network and Sharing Center
   3. Click on Change adapter Setting

   4. Right Click on Local Area Connection then select Properties

    5. Scroll and double click Internet Protocol Version 4 (TCP/IPVv4)
6. Select Use the following DNS server addresses: and input to
Preferred DNS Server: 208.67.222.222
Alternate DNS server: 208.67.220.220
 For EASY SETUP you can use the COMMAND prompt:

   1. Run
   2. cmd – this will open your command prompt
   3. And type the following

    netsh interface ip set dns “Local Area Connection” static 208.67.222.222
If you want to block adult content like porn use: 208.67.222.123 and 208.67.220.123


Available link for download

Read more »
Posted by at No comments:
Labels: , , ,

Saturday, January 7, 2017

How to Setup VPN Access

How to Setup VPN Access


Configure PPTP VPN in Windows 7

  • From Windows 7 Desktop, click Start – Control Panel to open the control panel;
  • Click Network and Internet;
  • Click Network and Sharing Center;
  • Click Set up a new connection or network, then Connect to a workplace;
  • Select option No, create a new cnonection, then Use my Internet connection (VPN);
  • In the Connect to a workplace window, fill VPN Server hostname with IP found from website;
  • In Next window, use freevpnaccess.com as User name field, and use password found from website in the Password field;
  • Click “Connect” button to start the free VPN connection in your Windows 7 Desktop.

Configure Free PPTP VPN in Windows 8

  • Please check www.Windows8VPN.com for more instructions.

Configure Free PPTP VPN in Apple iOS Devices

  • From iPhone, iPod touch or iPad, Press iPhone, iPod touch or iPad’s Home button;
  • Touch “Settings” icon, select VPN – Add VPN Configuration …
  • Select ‘PPTP’, adding fields as:
Description: FreeVPNAccess.COM
Server:
Account: freevpnaccess.com
RSA SecurID: OFF
Password: check vpn website
Encryption level: Auto
Send All traffic: ON
  • Touch ‘save’ button to save the VPN configuration;
  • Slide the VPN status button from OFF to ON position, wait until VPN connected.

Configure Free PPTP VPN in Google Android Devices

  • From Andord smartphones, tablets, or set tp boxes, switch back to Home screen;
  • Touch “Settings” icon, touch More… – VPN text bar;
  • Touch “+” button to add a new VPN profile, and fill the VPN fields as below:
  • Set “Name” as “FreeVPNAccess.COM”;
  • Set “Type” as PPTP;
  • Set “Server address” as the IP found from website;
  • Checked “PPP encryption (MPPE)” option;
  • Touch “Save” button to save the VPN connection;
  • Touch “FreeVPNAccess.COM” text bar to connect the VPN, Android will prompt the username/password information;
  • Enter “freevpnaccess.com” as the VPN username, and enter the password found from our website as the VPN password;
  • Touch “Connect” button to start the VPN connection, wait until VPN is connected.

Configure Free PPTP VPN in Windows XP

  • From Windows XP desktop, click Start – Control Panel to open the control panel;
  • Click Network Connections icon, open the Network Connections window;
  • Click Next button to get the first “New Connection Wizard” Welcome window;
  • Select “Connect to the network at my workspace” in “Network Connection Type” window, click Next;
  • Select “Virtual Private Network connection” in “Network Connection” window, click Next;
  • Enter FreeVPNAccess.COM as the VPN connection name, click Next;
  • Enter VPN Server hostname with IP found from website, click Next;
  • Click “Finish” button.
  • Now the VPN login window shows up,use freevpnaccess.com as the User name and password found from website as Password, click “Connect” button to start your free Win XP VPN connection.


Available link for download

Read more »
Posted by at No comments:
Labels: , , , ,
Subscribe to: Posts (Atom)