Showing posts with label p07. Show all posts
Showing posts with label p07. Show all posts
Wednesday, March 15, 2017
How to reset Canon MP287 error P07 or P08
How to reset Canon MP287 error P07 or P08
Ive tried several tutorials online but unfortunately it didnt resolve the problem because of the resetter program which is not compatible to the printer. So heres how to do it,
1. First, Turn off the printer
2. After turning OFF, press and Hold the STOP button at the same time Press and hold the Power button3. Release the STOP button ( Dont release the Power button )
4. Press the STOP button 6 times.
5. Release the Power button
6.It will display/show black.
Now it will set the printer into service mode. If something will popup to install your printer, just ignore it, and click cancel.
The next thing to do is to download the Service Tool for Canon MP287 printer. Click here
After you have successfully downloaded the program, just follow the steps shown on the image below.
 |
| Reset Canon MP287 |
Available link for download
Wednesday, February 8, 2017
How to Solve Error P 7 P7 or P07 5B00 on Canon printers
How to Solve Error P 7 P7 or P07 5B00 on Canon printers
Solution 1: If the device is not functioning properly or to clear memory, resetit.
- On the operator panel, press the button. (The display will go blank.) Note: It may be necessary to unplug the power cord if pressing the ON button does not shut off the printer.
- Wait approximately ten seconds and then press the button again.
- Wait until the device has completed its cycling process before submitting another job request. Note: It may be necessary to unplug the power cord and retry if the above steps do not clear the error.
Solution 2:
Step 1: Entering Service Mode
- While the printer is OFF, press and hold the Start/Stop button (Resume/Cancel in some other models).
- While holding the Start/Stop button, press and hold the POWER button.
- When the POWER LED (green light) lit, release the Start/Stop button (still holding the POWER button).
- Press the Start/Stop button TWICE (still holding the POWER button)
- Release the POWER button.
- Wait for the LCD to display “0? (zero).
Step 2: Using Resetter / Software
- Download Ressetter: http://www.ziddu.com/download/10241255/ServiceTool_1050.zip.html
- Run “service_tool 1050.exe”.
- Confirm detected USB-port numbers on USB port column.
- Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.
- Click “platen button” on the “Clear ink counter” section. The printer will print again.
- Turn off the printer and then turn the printer on. You printer is ready for use.
Available link for download
Subscribe to:
Posts (Atom)