Friday, February 10, 2017

How to fix error 1313 in canon MX series Printers

How to fix error 1313 in canon MX series Printers


Description

The paper jammed as the machine pulled in the printed paper.

Resolution

Remove the jammed paper following the procedure below -

NOTE- If the printed paper piles up on the paper output slot, the machine may pull it in and the paper jams inside the machine. Remove the printed paper from the paper output tray before it amounts to 50 sheets.
The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or the unsent faxes are stored in the machines memory. Make sure the machine completed sending or receiving all faxes before disconnecting the power cord. If you unplug the power cord, all the faxes stored in the machines memory are deleted.
1.      Press the [Stop] button to cancel any print jobs and turn off the machine.
2.      Detach the rear cover.
3.      Detach the transport unit cover.
4.      Pull out the paper slowly. 
NOTE - Do not touch the inner parts of the machine. If you cannot pull out the paper, open the paper output tray.
5.      Attach the transport unit cover.
6.      Attach the rear cover. 

If you were not able to remove the paper in step 4 continue below:
7.      Detach the lower and upper cassettes.
8.      Pull out the paper slowly.
9.      If the paper is not loaded properly in the cassette, remove the paper, and then reload it after aligning the edges of the sheets. 
NOTE - When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly.

10.  Attach the cassettes to the machine, and then press the [OK] button.
If the above solution has not resolved your error, please contact your nearest Canon authorised service facilit


Available link for download

No comments:

Post a Comment